BIOKLAR 140

Catalogue index: L-F126AN / Art. No.: F126

  • In stock
  • English name:
    • BIOKLAR 140
  • Art.No.:
    • F126
  • EAN code:
    • 5907708602619
  • Producer:
  • Net weight [kg]:
    • 347
  • Quantity in a box:
    • 0

Description

BIOklar 140 pond
filter


Professional, multi-chamber pond filter with a capacity of up to 140,000 liters . Filters from the BIOklar series provide complete, very effective filtration. 
Made of polyester-glass laminate, they are characterized by a very durable construction .
The filter provides a suitable biologically active surface, which is crucial in maintaining clean, clear water, and maintaining a proper biological balance in the pond, even with a large fish stocking.

A settler was used in each chamber, used to easily remove impurities from the filter and clean the filtration chambers. 
In order to make cleaning of such a filter easier and for greater control over the flow of water through the filter material, the filter is divided into four chambers connected in series.


 

The filter can be seen on the video:





User's manual [pdf]


Technical data:  

Input: ø 25/32/40 or 110 mm, output: ø 110 mm 

Settlers with drain valves: ø  63 mm
Recommended pump capacity: approx. 30,000 L/h; for example Pump JSP 35000     
Dimensions: 295x108x100 (H) cm 
Intended for joints with a capacity of max. 140,000 liters
Color: anthracite or black

BIOklar filter table


Filter materials: 

I Chamber - filter brushes 

The pump from the pool pushes water into the first module, where it is directed to the bottom of the module. Here the stream of water slows down and the coarsest impurities precipitate.
The lower part of each chamber acts as a settler, from which the sediment can be easily removed by opening the valve located in the lowest part of the module.
Then, the water goes smoothly to the upper part of the tank, where there are special filter brushes, similar to those for washing bottles.
They work mainly mechanically, catching thicker suspensions.



II and III Chamber - filtration cloth or Japanese mat * 

Next, through the overflow, water enters the second and further third module, always first reaching the bottom of the clarifier, and then passing through the filter material resting on a special grid.
The second module is filled with either a rather thick filtering fleece or a so-called Japanese mat (a type of thick sponge)
- it mechanically captures finer particles of the suspension, but also to a large extent due to the large active surface, there is a biological decomposition of pollutants.




IV Chamber - filtration substrate - porous fired clay in grids - Aquarock

- The fourth module mainly serves the role of biological filtration. They are filled with a special fired and highly porous Aquarock clay which is an ideal habitat for nitrifying bacteria.

 





Filter cleaning is maximally simplified. Coarse cleaning is performed more frequently (every week) and involves removing impurities from settling tanks. One should open for a moment each of the 4 valves under each of the 4 modules, because there they sediment the thickest pollutants. A more thorough cleaning is performed by opening the valve in each of the settlers for a longer time, and when the water escapes from the module, move the brushes and the filter mat, causing the descent together with the water that escapes.
Wait until all the water leaves the individual chambers.



 

Attention!

BIOklar filters are also available in a gravitational version, in which water from the pond flows into the filter under the influence of gravity and after filtration through all materials is pumped out of the last chamber.

  • All filters can work in a pump version (inlet for a hose with a diameter of 25/32/40 mm) and gravity (inlet for a pipe with a diameter of 110 mm).
  • Models 8, 15 and 200 are available as standard in the pump version, inlet in the upper part of the first chamber. On request, it is possible to make a gravity version - then the inlet at the bottom of the filter.
  • Models 30, 60, 120 and 140 are available as standard in both pump and gravity versions. Both versions have an inlet at the bottom of the filter, straight to the first sediment chamber.
  • When ordering a filter, please specify whether it is a pump or gravity version.
  • Transport costs (shipping on a pallet) are not included in the price of the Bioklar filter

Ask about product